hydraulic powered hand tools, hydraulic power units, breaker, tamper, impact wrench, "power drill", "chain saw", "concrete saw", "cross cut saw", "extension saw", street tools, hydraulic alternator generator, construction, "hydraulic intensifier", "hydraulic power unit", "rock drill", "clay spade", "hydraulic crimper", "moil point", "hydraulic couplers", "hydraulic hose", "hydraulic cutters", Gator, crimpers, cutters
|
|
|
|
|
|
|
||||
|
|
|
|
MASTER DISTRIBUTORS CALIFORNIA UTILITY EQUIPMENT, INC. |
||
| |
1-800-514-9503 HYDRAULIC TOOL DIRECTORY |
||
|
|
"REPORTED AS BEST IN INDUSTRY"
PDF
|
||
 |
4-10 GPM OUTPUT WITH DETENTS AND AUTO-START |
||
|
NEW
|
||
|
NEW
|
||
|
ONLY THREE MOVING PARTS FOR LOW MAINTENANCE
|
||
|
|
RUGGED TOOLS
THAT WORK HARD FOR MANY YEARS
|
||
 |
|||
 |
|||
 |
|||
PDF files |
|||
|
OVER 450 FOOT POUNDS OF TORQUE - REVERSIBLE - RUGGED |
||
|
OVER 2,000 FOOT POUNDS OF TORQUE - POWER TO SPARE
|
||
 |
NEW | ||
 |
PDF files UP TO 450 GPM - LIGHT WEIGHT - CAN RUN DRY |
||
 |
3 INCH SOLIDS - LIGHT WEIGHT - CAN RUN DRY
|
||
|
4 INCH SOLIDS - LIGHT WEIGHT- 900 GPM+ - CAN RUN DRY
|
||
 |
|
||
|
|
|||
 |
OVER 450 FOOT POUNDS OF TORQUE TO THE BLADE |
||
 |
ACCEPTS ABOVE HYDRAULIC POWERED CUT-OFF SAW |
||
|
|
|||
 |
|
||
|
|
|||
 |
- TOOLS DESIGNED TO REALLY WORK WELL |
||
 |
|
||
|
|
|||
 |
OVER 450 FOOT POUNDS OF TORQUE ON THE AUGER
|
||
|
NEW
|
|||
 |
NEW
|
||
 |
OVER 450 FOOT POUNDS OF TORQUE AT THE CHAIN SPROCKET |
||
|
|
|||
 |
INSULATED AND NON-INSULATED MODELS
|
||
|
|
|||
 |
|
||
|
POWERFUL AND RUGGED LIGHT WEIGHT TREE TRIMMING TOOLS - INSULATED AND NON-INSULATED MODELS - OVER 450 FOOT POUNDS OF TORQUE ON THE CUTTER
|
||
|
NEW INSTALLS ACAR and ACSR TRANSMISSION LINES WITH EASE |
||
|
POWERED FROM LOW PRESSURE CIRCUITS - 2000 PSI
|
||
 |
POWERED FROM LOW PRESSURE CIRCUITS - 2000 PSI |
||
|
|
|||
|
|
||
 |
|
||
  |
|||
 |
PLUG IN AC POWER WHERE AND WHEN YOU NEED IT
|
||
|
FOR TOOL USE DIRECT FROM BACKHOE (etc.) HYDRAULIC PTO CIRCUIT - INPUT 2,500 PSI - CONTROLLED OUTPUTS TO 2,000 PSI / 10 GPM
|
||
 |
CONVERTS 2000 PSI TO 10,000 PSI OUTPUT HYDRAULIC PRESSURES
|
||
 |
PRESSURE AND CONTROLS FOR HYDRAULIC CIRCUITS - INPUT 3,000 PSI - CONTROLLED OUTPUTS TO 2,150 PSI / 10 GPM
|
||
|
|
|||
|
|
|||
|
|
|||
|
|
|
|
Copyright 2002, all rights reserved to California Utility Equipment, Inc. |
